WhisPrompt App & Setup Guide

Set up your device, find the desktop app, and get help with everyday voice input.

The WhisPrompt desktop app officially launches in early December, alongside product shipments.

Mac with an Apple M-series chip

Windows 11 · x64 (ARM not supported)

What comes next?

  • Choose the app for your computer’s operating system.
  • Follow the installer’s instructions.
  • Connect the Dongle, open the app, then follow the sign-in and setup instructions.

Set up your WhisPrompt

Have your device, supplied Dongle, a USB-C cable, and computer ready. Follow the steps below for your first connection.

  1. WhisPrompt connected to USB-C power

    Connect to power via USB-C

    Before first use, connect the WhisPrompt device to power with a USB-C cable to activate it. Rated charging input: DC 5V ⎓ 1A.

  2. Dongle connected to a computer

    Plug the Dongle into your computer

    Plug the supplied Dongle into a data-capable USB-C port on your computer. Keep it connected during setup and use.

  3. Install and set up the app

    Go to Downloads and choose the app for your computer. Install and open it, sign in, then follow the on-screen instructions for permissions and device setup.

    Go to Downloads
  4. WhisPrompt voice input controls

    Button assignments and input controls follow your current app configuration.

    Try your first voice input

    Click a text field on your computer. Follow the app instructions to start voice input, say a short sentence, then finish and check the result.

Start with a short sentence.

Connect, try voice input, and find a few practical checks when something doesn’t work.

Try voice input

For first use, activate the device, connect the Dongle, and complete app setup first.

Need to connect? Read the setup guide
  • Click a text field on your computer.
  • Start voice input using the controls shown in your app.
  • Say a short sentence, then follow the app instructions to finish.
  • Check that the text appears in the field you selected.

Button assignments can change with your configuration. Follow the controls shown in your app.

No text appears

  • Check the device and receiver

    Make sure you have activated the device with USB-C power and connected the Dongle to a data-capable USB-C port on your computer.

  • Check the app

    Open the app, make sure you are signed in, and complete the permissions and device setup it requests.

  • Check the text field

    Click the intended text field, then try another short voice input using the app’s instructions.

macOS app walkthrough